NTC-09.08.3 “Door operating gear Frequency converter- Asynchronous motor”

• Control unit;
• Actual model of door operating gear.

Control unit has a body made from aluminium profile where are installed the following electric equipment:

• power supply unit +12V;
• control card UPDKL-2.0;
• PC communication card;
• Faults input card.

The front panel has mounted the following elements:

• electrical functional diagram for connecting the door opener control device UPDKL-2.0;
• illustration of general nodes of door opener with foot-notes;
• operator’s panel of door operating gear controls UPDKL-2.0;
• faults input switches;
• test sockets for measuring actual electrical signals;
• USB-connector;
• protection elements (automatic circuit breaker).

Actual model of door opener is made as a frame steel construction with installed door opening/closing mechanism. All moving elements are protected by transparent screens from polycarbonate with width of 4 mm. For performing the installations there is foreseen double pivoted doors. For safety reason is mounted a limit switch, which blocks stand operation at open top.  

The drive contains an electric motor with a built-in encoder and a drive pulley on the shaft, a tensioner with a driven pulley, a toothed belt, a carriage bracket, and a mechanical lock.

 The training laboratory equipment contains:

• get to know operating modes of the door drive control panel;
• get to know with controls and indication;
• get basic skills of programming the unit;
• to study faults diagnostics methods at door drive controls UPDKL-2.0.

The equipment is accompanied with:

• a set of teaching materials and technical documentation intended for the teaching staff;
• software.