Structurally, the training laboratory equipment is made as a prefabricated base, On its rack is rigidly fixed the left end of the beam. Attached to the right end of the beam is a cable tensioned with rollers. The tension in the cable is created by the load. Under the action of the force applied from the side of the cable, the beam is deformed. The movement of the left end of the beam in the vertical and horizontal planes is fixed by indicator heads. On the beam, at some distance from the free end, a section is highlighted in which mechanical stresses can be measured using strain gauges.
The loaded beam’s shifts are measured with dial gauge indicator.
The laboratory stand is supplied with:
- a set of methodical and technical documentation for academic staff;
- a software.