The training laboratory equipment allows to be prepared according to the following sections:
- Mounting the electrical equipment for industrial and residential buildings using modern technologies:
- mounting the cable support systems (pipes, cable ducts, trays);
- connection and wiring of cable and conductor lines;
- mounting the lighting devices;
- mounting the accounting and distribution board.
- Programming logic programmable relay (ONI).
- Starting.
- Search and localization of faults.
The cabin can be used to prepare for professional skills competitions in the WORLDSKILLS system for the “Electrical mounting” competency.
For illumination of the working place is used LED lamp.
The training stand includes:
- Electric cab:
- Frame for electrical work (it is a built-up frame made of a metal profile with fixed on it plywood sheets).
- Сontrol cabinet.
- A set of electrical devices for performing electrical work:
- Automatic circuit breaker ВА47-29 2Р 6А 4,5кА type В (2 pcs.);
- Residual current circuit breaker АВДТ32М С20 30mА (2 pcs.);
- Contact switch KMI-23211 32А 230V/АС3 1НЗ (2 pcs.);
- Relay PTI-2355 electrothermal (2 pcs.);
- Power cable 380В with plug SSI-015;
- Power cable extension 380V (socket SSI-215 – plug SSI-015), length 5m.
- Electrician’s tool kit:
- Electrician kit – 1 pc.
- Steel ladder – 1 pc.
- Angular pivoting miter box saw – 1 pc.
- Reversible screwdriver with a set of bits – 1 pc.
- Accumulator screw-driver – 1 pc.
- Hammer 200 g – 1 pc.
- Level 600 mm – 1 pc.
- Set of nibbles for screw driving machine – 1 pc.
- Drill bit set for metal (D=1-10 mm) – 1 pc.
- Hacksaw – 1 pc.
- Set of Engineers Files for metal 200 mm – 1 pc.
- Insulation-resistance meter – 1 pc.
- Tape measure 3 m – 1 pc.
- Pensile – 1 pc.
- Electronic angular gage – 1 pc.
- Crimping tool – 1 pc.
- Bolt cropper – 1 pc.
- Pulling-off device for cable insulation 8-28 mm – 1 pc.
- A set of consumables and wiring accessories for electrical work:
Name of the item UOM Quantity Stationary plug SSI-515 pc. 1 Single-key switch (for 2 modules) pcs. 3 Single-key switch outdoor pcs. 2 Limit switch pcs. 3 Tool mounting clip CF16 pcs. 45 Tool mounting clip CF20 pcs. 20 Coupler for cable channel 100х60 pcs. 2 Terminal block ЗНИ-4PEN 4ьь2 (JXB-ground) pcs. 20 Terminal block ЗНИ-4мм2 (JXB35А) gray pcs. 50 Terminal block ЗНИ-4mm2 (JXB35А) blue pcs. 30 Cable channel 100х60 m. 6 Cable channel 25х16 m. 4 Earthing clamp for wire tray pcs. 4 Buttom “Start” green pcs. 2 Bottom “Stop” red pcs. 1 Housing for buttoms 3 places pcs. 1 Wall bracket gen.100 mm. pcs. 12 Fluorescent lamp 18 W 765 cold-white pc. 1 LED lamp ball pcs. 9 Wire tray 35х100 m. 6 Mounting board pcs. 4 Pipe-box coupling IP65 BS16 pcs. 4 Pipe-box coupling IP65 BS20 pcs. 4 Sleeve-tip Е1508 1.5mm2 with insulated flange (red) (100 pcs) pack. 2 Sleeve-tip E2508 2.5mm2 with insulated flange (blue) (100 pcs) pack. 1 Sleeve-tip E4009 4mm2 with insulated flange (gray) (100 pcs) pack. 1 Sleeve-tip E6012 6mm2 (black, 20pcs) pack. 1 Sleeve-tip Е7508 0,75mm2 with insulated flange (white) (100 pcs) pack. 1 Sleeve tip NGI2 0.75-10 with insulated flange (white) (100 pcs) pack. 1 Sleeve-tip NGI2 1.5-12 with insulated flange (red) (100 pcs) pack. 1 Sleeve tip NGI2 2.5-12 with insulated flange (blue) (100 pcs) pack 1 Sleeve tip NGI2 4.0-12 with insulated flange (gray) (100 pcs) pack 1 DIN rail stopper (metal) pcs. 20 PV-3 1х0,75mm² (red) m. 50 PV-3 1х1,5mm² (blue) m. 20 PV-3 1х1,5mm² (yellow green) m. 10 PV-3 1х1,5mm² (red) m. 50 PV-3 1х2,5mm² (blue) m. 10 PV-3 1х2,5mm² (yellow green) m. 30 PV-3 1х2,5mm² (black) m. 10 PV-3 1х4мм² (blue) m. 10 PV-3 1х4мм² (black) m. 10 Swivel 90 pipe-pipe CRS16G pcs. 16 PVA wire 2×0.75 m. 10,5 PVA wire 3х0,75 m. 6,5 PVA wire 3х1,5 m. 35 PVA wire 3х2,5 m. 5,5 PVA wire 4х2,5 m. 5,5 PVA wire 5х6 m. 4 Dividing wall, height 60 m. 8 Connector РРМ77/3(PTF11A) for REK77/3(LY3) module type pcs. 3 Relay REК77/3(LY3) 10А 220V АC pcs. 3 Frame and support for cable duct for 4 modules pc. 1 Ringing electrical device at DIN-rail pc. 1 Socket with z / k 2k (for 2 modules) pcs. 2 Stationary socket SSI-114 pcs. 2 Gland PG 21 conductor diameter 15-18mm IP54 pcs. 2 Gland PG 29 conductor diameter 18-24mm IP54 pc. 1 Self-tapping screw 4.1×30 mm pack. 1 Self-tapping screws 4,2x13mm pcs. 100 Self-tapping screws 4,2х19mm pcs. 100 Self-tapping screws 4,2х25mm pcs. 100 Lighting fixture ball 60W white pcs. 6 Lighting fixture gray 60W pcs. 2 Lighting fixture LCLR 01-1х18(20)-001 pc. 1 Signalling lamp (green) (neon) pcs. 2 Connecting set double MDS20 pcs. 25 Smooth rigid PVC pipe d16 gray (111m), 3m m. 9 Corrugated pipe PVC d 20 with probe (100 m) m. 3 Clamp 4,8x300mm nylon (100pcs) pack. 2 Bus N “zero” on DIN-isolator pc. 1 PE bus “ground” on DIN-isolator pc. 1
The stand is accompanied by a set of technical documentation.