NTC-24.01 “Investigation of flame structure”

Br0.00

The laboratory stand (unit) is designed for training purposes when conducting laboratory and practical works.
Category:

The laboratory stand (unit) is designed for training purposes when conducting laboratory and practical works. The unit is suitable for conducting works related to the investigation of flame areas at different heights in diffuse and kinetic combustion.

The stand is performed as a set of desktop equipment. A gas burner and a measuring system are installed on special basements. The burner is equipped with a mixer for mixing gas with air. Air flow rate is regulated by means of special valves. Temperatures in different zones of the flame are measured by means of a thermocouple mounted on a tripod. The temperature can be increased or reduced along the height of the flame with the regulator. The gas enters the mixer from the cylinder whereas the air enters from the compressor receiver. The thermocouple readings are registered by the measuring device. The stand is complemented with the compressor.

A set of methodical and technical documentation intended for academic staff is attached to the laboratory stand.

Experiments provided

  1. Study of the laboratory unit.
  2. Experimental investigation of flame structure in diffuse and kinetic combustion.

Technical specifications

Power supply ~50Hz 220V (single-phase 220V 50Hz)
Power consumption, Watt 0,1
Stand overall dimensions:
Width, mm 1000
Height, mm 300
Depth, mm 500
Weight, kg 30

Scope of delivery

  • gas burner on basement;
  • measuring system on basement;
  • laboratory tripod;
  • gas cylinder;
  • lighter;
  • hoses;
  • air compressor;
  • thermocouple;
  • passport;
  • CD-R with documentation.