Русский
NTC-10.67 “Distribution networks in electric supply systems”
Br0.00
The laboratory stand is designed for carrying out laboratory works in universities and secondary technical educational establishments for the study of “Power Supply of Industrial Enterprises”, “Electrical systems and networks”, etc.
- Description
- Experiments provided
- Technical specifications
- Scope of delivery
- Additional equipment (specified when ordering)
Structurally the stand consists of a body in which part of electric equipment, microprocessor measuring system, front panel and desktop of integrated table are mounted.
Has two h/w versions: full size bench top version and table version.
The body of the stand contains:
- step-down transformers;
- load resistor block;
- capacitor unit;
- inductance choke;
- power autotransformer based on OSM1-0.1;
- microprocessor measuring system module.
The module of microprocessor measuring system allows multi-channel measurements with the display measured values on digital indicators. The complex of measured parameters is sufficient for the effective study of processes in electricity systems without connecting the stand to computer.
The front panel shows electrical circuits of objects under study. Patchholes, digital devices indicators, switching equipment and controls allowing to alter operating parameters are mounted on the panel.
The controls on the front panel of the stand include:
- the switch of the load unit, allowing to set various operation modes of the three phase circuit;
- capacitance box toggle switches which allow to alter capacity between 0,47÷7,47 uF with 0,47 uF step;
- wrench switches for selecting harmonics filter, line and step-down transformer voltages.
The laboratory stand is supplied with:
- a software for testing students’ knowledge before conducting the works. Both theoretical knowledge and understanding contents of the laboratory work are tested. Each student’s knowledge level id graded;
- a set of teaching materials and technical documentation intended for the teaching staff.
Experiments provided
- Measurement of electric energy quality using a personal computer.
- Determination of voltage fluctuation effect on power consumed by load.
- Counterload voltage control.
- Voltage control by reactive shunt compensation using capacitor bank.
- Voltage control by series reactive compensation using capacitor bank.
- Studying the generation level of the highest current harmonics of a thyristor voltage regulator in the load supply circuit with alternating current (AC).
- Higher harmonics compensation with the use of filter compensating device.
- Measurement of transformer steady state parameters.
- Measurement of power line steady state parameters.
- Measurement of open-circuit power distribution network steady state parameters.
- Effect of reactive power compensation with the use of capacitor bank on open-circuit power distribution network steady state parameters.
Technical specifications
| Power supply: | 3~380V/220V, 50Hz | |
| Power consumption, Watt, max | 300 | |
| Stand overall dimensions, max: | ||
| Width, mm | 1310 | |
| Height, mm | 1460 | |
| Depth, mm | 600 | |
| Weight, kg, max | 80 | |
| Desktop version overall dimensions, max: | ||
| Width, mm | 1310 | |
| Height, mm | 680 | |
| Depth, mm | 600 | |
| Weight, kg, max | 60 | |
Scope of delivery
- training laboratory system – 1 pc.;
- supplementary materials in electronic format – 1 pc.;.
- passport – 1 pc.;
- set of jumpers – 1 pc.