NTC-10.48.1 “Energy saving technologies. Autonomous energy system with MPMS”

Br0.00

The training laboratory system allows carrying out laboratory works studying autonomous energy system with two three-phase generators and ICE (Internal combustion engine) running on fuel oil. One of the generators has a mixer providing the possibility of work on generator gas.

Categories: Power supply, electric power industry, Energy conservation

The generators can work either separately or together as an autonomous system containing a load device or in the parallel with network. Voltage and current oscillograms for the autonomous system can be displayed.

Structurally, the system consists of:

Stand–body with a part of electrical equipment, electronic boards, front panel, and table top. Two generators and a load device are connected to the stand.
Wood gas generator of reverse process producing generator gas for one of the generators.
Three-phase generators with ICE running on fuel oil. One of them has an installed mixer providing the possibility of work on generator gas. The generators can work either separately or together as an autonomous system containing a load device or in the parallel with network.
Three-phase load device.

Software and methodical documentation supplemented to the training system:

methodical and technical documentation set intended for academic staff;
measuring complex software.

Experiments provided

Investigation of generator unit.
Generator- network synchronisation.
Parallel operation of generators.
Voltage and power losses.
Wood gas generator.
Generator with ICE running on generator gas.

Technical specifications

Power supply		3~50Гц, 380В
Power consumption, kW		6
Type of fuel		woodfuel*
Type of fuel for gasoline generators		gasoline not less than 92 RON
Stand overall dimensions:
	Width, mm	1470
	Height, mm	610
	Depth, mm	600
Generator overall dimensions:
	Length, mm	800
	Width, mm	500
	Height, mm	500
Gas generator overall dimensions:
	Width, mm	1300
	Height, mm	550
	Depth, mm	1250
Load device overall dimensions:
	Width, mm	400
	Height, mm	300
	Depth, mm	300
Weight of the stand, kg		50
Weight of the generator, kg		60
Weight of the gas generator, kg		150
Weight of the load device, kg		6

Scope of delivery

training laboratory system – 1 pc.;
a set of connecting jumpers and cables – 1 pc.;
Gasoline generator – 2 pcs.;
Gas generator – 1 pc.;
Load device – 1 pc.;
Air exhauster (for ignition) – 1 pc.;
Carbon monoxide alarm – 1 pc.;
Passport – 1 pc.;
CD-R with documentation – 1 pc.

Necessary additional equipment

PC or laptop

Recommended additional equipment

Multimeter with a thermocouple.
Gas analyser.