NTC-11.99 “Electrohydraulic systems with automatic control”

Br0.00

The stand consists of hydro station, two ACS (program and tracing act), programmable controller, sensors of longitudinal movement and end positions, setting device. Embedding of different control algorithms is provided. 

Category:

Training equipment consists of the following components:

  • stand;
  • two hydro stations.

At this stand, it is possible to study hydraulic actuators with translational movement of the output link, and hydraulic actuators can be built using various element bases. Including primarily devices with proportional control.

The stand has a frame structure with a table and two panels: lower and upper. The bottom panel has 7 gauges and a thermometer. On the upper panel there are electric control devices for the stand and its sub-systems, measuring devices. The hydraulic circuit diagram of the bench is also located on the top panel.

At hydroelectric stations, a hydraulic pump drive motor is installed.

A set of methodological and technical documentation intended for the teaching staff is attached to the stand.

Experiments provided

  1. Designing of control algorithms and software;
  2. Programming of microprocessor devices.
  3. Investigation of electrohydraulic tracking system.
  4. Investigation of autocontrol software system.

Technical specifications

Power supply 3~50 Hz 380 V 3P+PE+N
Power consumption, kW 3
Rated pressure 5,0…5,2 MPa
Hydrotank volume 30 – 35 dm
Recommended working fluids mineral oils М-8, М-10
Overall dimensions
  width, mm 1200
  height, mm 1800
  depth, mm 900
Hydrostation overall dimensions:
  width, mm 500
  height, mm 550
  depth, mm 700
Weight, kg, max. 120

Комплектность

  • training laboratory system – 1 pc.;
  • hydrostation– 1 pc.;.
  • cable for programming – 1 pc.;
  • working fluid – 1 pc.;
  • passport– 1 pc.;
  • CD with supplemental documentation – 1 pc.