NTC-15.21 “Antitheft system with immobilizer”

The stand is performed as a panel with a schematic diagram of the antitheft alarm system with basic components located on it – control unit, shock sensor, antenna module with call button, service button, siren, doors’ electric drive, ignition switch and two alarm transmitters.
Category:

The stand is performed as a panel with a schematic diagram of the antitheft alarm system with basic components located on it – control unit, shock sensor, antenna module with call button, service button, siren, doors’ electric drive, ignition switch and two alarm transmitters. There is also a schematic drawing of a car on the panel. It contains an indication of the system’s major components location.

Experiments provided

  1. Study of principle of alarm system operation.
  2. Passive arming with locking doors.
  3. Programming function of alarm signal confirmation.
  4. Programming function of automatic doors locking with ignition switching on.
  5. Programming function of automatic doors unlocking with ignition switching off.
  6. Programming function of automatic rearming.
  7. Programming function ofengine passive immobilizing.
  8. Programming function of protection against NPC false response.
  9. Programming function of system emergency shutdown by means of service button.
  10. Programming function of system disarming in 2 stages.
  11. Programming ANTI-HIJack function.
  12. Programming function of vehicle protection with engine running.
  13. Programming function of“Turbo” mode automatic activation.
  14. Programming channel 2 operating mode.
  15. Programming channel 3 operating mode.
  16. Programming function of arming with separate disabling of zones of sensors.
  17. Programming function of arming without transmitter.

Technical specifications

Power supply ~50Hz 220V
Power consumption, W 60
Stand overall dimensions:
Width, mm 600
Height, mm 430
Depth, mm 200
Weight, kg 10

Scope of delivery

Stand 1 pc.
Passport 1 pc.
Manual for laboratory works 1 pc.