NTC-08.47.1/10 “Installation of automation equipment”

Peg board is made of aluminum profile and equipped with special brackets for quick installation and fixing at the frame.

The studied equipment is mounted at the peg board. Mounting in accordance with developed (set) circuit is made after installation of the devices.

It is possible to install the temperature and humidity sensors in the ventilation duct. Pressure sensor is mounted at the peg board using special basement with threaded holes and fittings.

Set of the laboratory equipment for mounting and studying includes:

• channel heater D100mm ~220V – 1 pc.;
• ventilation channel fan D100mm with replaceable central unit – 1 pc.;
• set of pipeline segments and ventilation system support elements D100mm – 1 set;
• measuring regulating instrument with two universal inputs, one relay output and one analogue output 4-20mА – 2 pcs.;             
• сhannel humidity and temperature meter  – 1 pc.;
• semistor power regulator with digital control 16А, ~220V – 1 pc.;
• thermocouple with cable output – 1 pc.;
• thermal resistance in sleeve with cable output – 1 pc.;
• gauge pressure transmitter 1.0MPa with output 4-20mА – 1 pc.;
• control station housing for 2 slots – 3 pcs.;
• control station housing for 3 slots – 2 pcs.;
• magnetic starter ~220V – 4 pcs.;
• attachment for magnetic starter – 2 pcs.;
• socket for mounting to din-rail ~220V with grounding pin – 1 pc.;
• sound warning (alarm) for mounting to din-rail ~220V – 2 pcs.;
• led fittings for mounting into the control station ~220V – 4 pcs.;
• buttons for installation into the control station – 6 pcs.;
• din-rail mounting terminal connectors – 40 pcs.;
• limiter for din-rail – 10 pcs.;
• terminal clamps – 10 pcs.;
• automatic circuit breaker 2-pole 10А – 1 pc.;
• automatic circuit breaker 2-pole 1А – 2 pcs.;
• automatic circuit breaker 1-pole 1А – 2 pcs.;
• slotted wiring duct 25х40mm – 5 m;
• din-rail 35mm – 5 m;
• mounting kit – 1 set.

The set of equipment for installation can be added in accordance with the Customer’s requires:

• an additional set of tools for installation;
• a set of connecting wires.