Русский
NTC-18.54 “The study of heat processes”
Br0.00
The training laboratory system is designed as a educational equipment to carry out laboratory experiments to study “Heat processes and heat transfer” at Universities and specialized secondary schools.
Category: Heating and heat transfer theory
- Description
- Experiments provided
- Technical specifications
- Scope of delivery
- Additional equipment (specified when ordering)
Structurally, the stand consists of a housing with a part of electrical equipment, electronic boards, a front panel and a worktop of an integrated desktop are installed. A separate mobile side table has a high-temperature electric furnace with a built-in thermostat.
The following equipment is located inside:
- step-down power transformer;
- power supply +12 V (current 0.5 A), +5 V (current 0.5 A);
- digital recording millivoltmeter-stopwatch board;
- single-phase electricity meter-wattmeter card.
The electric circuit is shown on the front panel of the stand and the following equipment is installed:
- circuit breaker block;
- indicators and controls of a memorizing millivoltmeter-stopwatch;
- RS-485 interface connector from an electricity meter and a storage millivoltmeter-stopwatch;
- signal cable connector from the furnace;
- furnace power supply socket.
Measurements are recorded according to the readings of digital indicators of a millivoltmeter-stopwatch, own indicators of an electricity meter and a temperature regulator.
The stand is accompanied with:
- a set of teaching materials and technical documentation intended for the teaching staff;
- software.
Experiments provided
- The study of characteristics of the thermocouple EMF.
- The study of power characteristics of the uncharged muffle furnace.
- The study of power characteristics of the charged muffle furnace.
- The study of properties of different materials.
- Determining of the softening temperature of different materials.
Technical specifications
| Power supply | ~220V, 50Hz | |
| Power consumption, kWatt, max | 1.2 | |
| Stand overall dimensions, max: | ||
| Width, mm | 610 | |
| Height, mm | 1470 | |
| Depth, mm | 600 | |
| Stand overall dimensions, max: | ||
| Width, mm | 450 | |
| Height, mm | 1300 | |
| Depth, mm | 600 | |
| Weight, kg, max | 70 | |
Scope of delivery
- training laboratory system – 1 pc.;
- passport – 1 pc.;