07.37.B_montazh_i_naladka_elektroprivodov_1

07.37.B_montazh_i_naladka_elektroprivodov_2

NTC-07.37.B “Installation and commissioning of electric drives”

Br0.00

The training laboratory equipment is designed for acquiring skills in assembling electric drive control circuits, diagnostics, and troubleshooting.

Category: Electric drive and converting technology

Structurally the equipment consists of three parts:

basis-bench;
unit of asynchronous electric motor;
set of interchangeable panels.

Basis-bench is made on a universal aluminum basis and contains reusable devices (blocks) for laboratory work. The blocks can be easily removed and installed. The composition of the blocks depends on the list of laboratory experiments performed on the bench.

The basic set of basis-bench includes:

input block IB02;
power supply block PSB01;
power supply block PSB04;
measuring block MB02;
speed measurement block SMB02;
soft start block SSB01;
relay block RB01;
frequency converter block FCB01;
block of interchangeable panels RPB01.

Input block IB02 supplies voltage to the basis; it is composed of a differential breaker, zero protection, short circuit protection.

Power supply block PSB01:

power 100W
Usup. 220V, 50Hz
Uout1 +5V, 1А stabilized
Uout2 +15V, 1А stabilized
Uout3 -15V, 1А stabilized
Uout4 +24V, 1А stabilized
Uout5 +250V, 1А non-stabilized

Built-in protection against short circuit currents.

Power supply block PSB04 three-phase power source 380/127V, 50Hz, power 190W.

Measuring block MB02 is intended for measuring current, voltage and power. Measurement accuracy is at least 1%. External display and interface for PC-connection – USB (galvanically isolated). Measurement range is specified by interchangeable panels.

Speed measurement block SMB02. Measurement accuracy is at least 1%. External display and interface for PC-connection – USB (galvanically isolated).

Soft start block SSB01 is intended for assembling asynchronous motor starting circuit. The bench uses a soft starter Schneider Electric series Altistart.

Relay block RB01 is intended for assembling asynchronous motor direct starting circuit, reversal control circuit, two-speed asynchronous motor control circuit. Relay RTZE is used in relay contact circuits as a protecting device.

Frequency converter block FCB01 is intended for assembling asynchronous motor control circuit.

Block of interchangeable panels RPB01 is intended for installing interchangeable panels and connecting them to power sources, measuring instruments, load, and control devices.

Unit of asynchronous electric motor is implemented on a remote frame, contains an asynchronous motor, a flywheel, a frequency sensor and a cable for connecting the basis-bench.

Interchangeable panels have standard size of A4. On the front surface of the panel mnemonic diagrams are depicted. Switching jacks and controls used for laboratory work are installed on the mnemonic diagrams. The lower part of a interchangeable panel is designed as a printed circuit board with connectors for connection to the basis-bench and is designed for switching all the necessary elements of the bench when performing laboratory work.

Circuits are assembled using special cables by connecting the control points on interchangeable panels with the corresponding points on the blocks used (relay block RB01, soft start block SSB01, frequency converter block FCB01).

Advanced users are offered to mount the equipment on RB01, SSB01, FCB01, and then to assemble the studied circuits on interchangeable panels.

The bench can be equipped with interchangeable blocks and panels for the installation and commissioning of DC electric drives.

The training system is supplied with a set of teaching materials and technical documentation intended for the teaching staff.

Experiments provided

Basic set:

1. Interchangeable panel NTC-07.37.B/01 “Asynchronous motor starting circuits”:

study of asynchronous motor thermal protection circuit;
study of asynchronous motor overcurrent protection circuit;
study of asynchronous motor direct starting circuit.

2. Interchangeable panel NTC-07.37.B/02 “Asynchronous motor reverse”:

study of asynchronous motor reverse circuit.

3. Interchangeable panel NTC-07.37.B/03 “Soft start”:

study of asynchronous motor soft start circuit.

4. Interchangeable panel NTC-07.37.B/04 “Frequency converter”:

study of asynchronous motor frequency start and control circuit.

5. Interchangeable panel NTC-07.37.B/05 “Two-speed asynchronous motor”:

study of two-speed asynchronous motor start and control circuit.

Additionally contents to delivery:

1. Interchangeable panel NTC-07.37.B/06 “DC motor starting circuits”:

study of direct start DCM;
study of DCM reverse;
study of DCM start-up as a function of time.

2. Interchangeable panel NTC-07.37.B/07 “DC motor – Thyristor converter”:

study of DCM operation when controlled from a thyristor converter.

3. Interchangeable panel NTC-07.37.B/08 “DC motor – Pulse-width converter»:

study of the work of DCM when controlled from a pulse-width converter.

4. Interchangeable panel NTC-07.37.B/09 “DC motor control circuits based on PLC”:

study of PLC-based DCM control circuits.

5. Interchangeable panel NTC-07.37.B/10 “Relay-contactor control circuits of asynchronous motor with phase-wound rotor and synchronous motor”:

study of the control circuit of an asynchronous motor with a phase rotor;
study of the control circuit of a synchronous motor.

Technical specifications

Power supply		3~50Hz 380V 3P+PE+N (three-phase five-wire with working neutral and ground conductors with line voltage 380 V, frequency 50 Hz)
Power consumption, Watt, max		500
Bench overall dimensions, max:
	Width, mm	1310
	Height, mm	1470
	Depth, mm	600
Weight, kg, max		140

Scope of delivery

basis-bench – 1 pc.;
unit of asynchronous electric motor – 1 pc.;
set of interchangeable panels – 1 set;
rack for storage of Interchangeable panels – 1 pc.;
set of mounting cables – 1 set;
control panel of relay RTZE – PU-U – 1 pc.;
passport – 1 pc.;
supplementary materials in electronic format – 1 pc.

Additional equipment (specified when ordering)

Recommended additional equipment:

Interchangeable panel NTC-07.37.B/06 “DC motor starting circuits”.
Interchangeable panel NTC-07.37.B/07 “DC motor – Thyristor converter”.
Interchangeable panel NTC-07.37.B/08 “DC motor – Pulse-width converter».
Interchangeable panel NTC-07.37.B/09 “DC motor control circuits based on PLC”.
Interchangeable panel NTC-07.37.B/10 “Relay-contactor control circuits of asynchronous motor with phase-wound rotor and synchronous motor”.